PONG Polypropylene Felt Filter Bags

Seadon's PONG polypropylene felt liquid filter bag is a nominal rated single layer filter bag. Liquid filter bags are used to capture impurity particles in liquid filtration. The max. operating temperature of PONG is 90°C (194°F). We offer 1~200 micron rating for customers to choose from. We also provide various types of seal rings (collors) to meet the needs of different customers, such as polypropylene or polyester SENTINEL/PolyLoc seal rings, zinc-plated steel ring, SS 304 ring, SS 316L ring.

Polypropylene felt is one of the most popular nonwoven fabric materials, made from a thermoplastic polymer that offers a variety of beneficial properties. It is needle punched with thousands of barbed needles until the correct thickness and density are reached.

MATERIAL

Polypropylene

MEDIA TYPE

Needle Felt

EFFICIENCY

Nominal

DESIGN

Standard

Features

  • Glazed finish to reduce fiber migration
  • Single layer felt construction
  • Sewn or fully-welded construction
  • Broad chemical compatibility
  • All industry-standard and custom sizes available
  • Ultrasonic hot-melting tech for fully-welded construction, without any chemical binder
  • 5 thread overlock safety stitch process for sewn filter bag to provide higher strength
  • Sewn by high-speed industrial sewing machine without silicone oil cooling, which will not cause silicone oil pollution
  • Polypropylene and Polyester materials meet the regulations for food contact use under FDA CFR21

Applications

  • Food and beverage
  • Paints
  • Varnishes
  • Inks
  • Chemicals
  • Process water
  • Wastewater

Specifications

Material
polypropylene felt

Seal Rings
Sewn zinc-pleated steel ring
Sewn SS 304 ring
Sewn SS 316L ring
Welded polypropylene/polyester Eaton SENTINEL ring
Welded polypropylene/polyester FSI PolyLoc ring
Welded polypropylene FSI x01 ring

Micron Ratings
1, 3, 5, 10, 25, 50, 75, 100, 150, 200 μm

Bag Size
#1: Φ7″ x 17″ (180 x 430 mm)
#2: Φ7″ x 32″ (180 x 810 mm)
#3: Φ4″ x 9″ (100 x 230 mm)
#4: Φ4″ x 15″ (100 x 380 mm)
#5(X01): Φ6″ x 20″ (152 x 510mm)
*Others on request

Filter Area
#1: 0.24 m2 (2.6 ft2)
#2: 0.48 m2 (5.2 ft2)
#3: 0.08 m2 (0.9 ft2)
#4: 0.16 m2 (1.7 ft2)
#5(X01): 0.19 m2 (2 ft2)

Max. Flow Rate
#1: 18 m3/h (80 gpm)
#2: 34 m3/h (150 gpm)
#3: 6 m3/h (25 gpm)
#4: 12 m3/h (50 gpm)
#5(X01): 16 m3/h (70 gpm)
*For liquids with a dynamic viscosity of 1 mPa·s @20°C (68°F).

Max. Operating Temp.
Plastic Collar:
PONG: 90°C (194°F)
Metal Collar:
PONG: 110°C (230°F)

Suggested Differential Pressure
2.4 bar (35 PSIG) max – dirty
0.7~1 bar (10~15PSIG) optimum change out
*Depending on the respective application requirements.

How to Order?

Request for Quote

We will contact you within 24h, please pay attention to the email with the suffix “@seadonfiltration.com”

Please enable JavaScript in your browser to complete this form.