Seadon's PEEKMO filter bags are made of polyether ether ketone (PEEK) monofilament mesh. PEEKMO is the most high-temperature resistant in monofilament mesh bags that is up to 240°C (464°F). The PEEKMO bag features a SNAP-RING collar. It's available in both zinc-plated and stainless steel, and produced under strict quality control by Seadon. There are #1 and #2 bag sizes.
PEEKMO Monofilament Mesh Filter Bags
MATERIAL
PEEK
MEDIA TYPE
Monofilament Mesh
EFFICIENCY
Nominal
DESIGN
Surface Filtration
Features
- Outstanding resistance to harsh chemicals
- High-temperature resistance up to 240°C (464°F)
- Excellent mechanical strength, stable pore size
- The SNAP-RING seal ring adapts to any bag filter housing
Applications
- Paints and varnishes
- Inks
- Chemicals
- Solvents
Specifications
Material
PEEKMO: polyether ether ketone
Seal Rings
Sewn SNAP-RING (zinc-plated/stainless steel)
Micron Ratings
100, 200, 250, 400, 600μm
Bag Size
#1: Φ7″ x 17″ (180 x 430 mm)
#2: Φ7″ x 32″ (180 x 810 mm)
Filter Area
#1: 0.24 m2 (2.6 ft2)
#2: 0.48 m2 (5.2 ft2)
Max. Flow Rate
#2: 11~17 m3/h (50~75 gpm)
#2: 22~34 m3/h (100~150 gpm)
*For liquids with a dynamic viscosity of 1 mPa·s @20°C (68°F).
Max. Operating Temp.
240°C (464°F)
Suggested Differential Pressure
2.4 bar (35 PSIG) max – dirty
0.7~1 bar (10~15PSIG) optimum change out
*Depending on the respective application requirements.
How to Order?
ISO9001 certified manufacturer of filter bags, filter cartridges, filter vessels and filter systems.
Resources
Contact
- No.423 Fumin RD, Dongzhou, Fuyang, Hangzhou, ZJ, 311401 China
- +86 153 9423 8672
- info@seadonfiltration.com
© 2024 Seadon Filtration, All Rights Reserved.